Whelen Home
Automotive Home
Back to Category
Click thumbnail for larger picture.
MODEL |
DESCRIPTION |
|
CANWCT2 |
|
Includes Standard Amplifier/Control Module with Thirty-Two, 2-1/2 Amp Outputs, Three Low Current 1/4 Amp Outputs, Eight Programmable 10 Amp Positive/Negative Outputs, and Control Head of Choice. Traffic Advisor™ Module and Three Diagnostix™ Indicators |
CANWCT2A |
|
Same as CANWCT2, Except With 8 (Positive or Negative) Input Expansion Module (Will Not Override Any Pre-Existing Control Head Features), 12 Total Inputs |
CANWCT3 |
|
Same as CANWCT2 , Except with CANport™ OBDII Interface Module. |
CCSRN4DA |
|
WeCan® External Amplifier, For Use With Cantrol®, For Dual Amplifier Applications |
CC5K1 |
|
New! Installation Kit for CANWCT3 Series for 2016-2018 Ford Interceptor Utility, Interceptor Sedan and F-150, 2018 Ford F-250/F-350/F-450/F-550, Expedition and Transit, 2017-2018 Ford Fusion and 2016-2017 Dodge Charger, No Charge when Purchased with Amplifier Control Module |
CC5K2 |
|
Installation Kit For CANWCT3 Series for 2017-2018 Chevy Tahoe and Silverado, No Charge when Purchased with Amplifier Control Module |
CC5K3 |
|
New! Installation Kit for CANWCT3 Series for 2018 Dodge Charger, Durango and Ram 1500, No Charge when Purchased with Amplifier Control Module |
|
Includes 4-Position Slide Switch, Six Push-Buttons, Microphone with Microphone Extension Cable, No Charge When Purchased with Amplifier Control Module |
|
|
Includes a Hand Held Combination Microphone and Controller, 5-Position Progressive Light/Siren Control, Nine Push-Buttons and Microphone Extension Cable, No Charge When Purchased with Amplifier Control Module |
|
|
Includes 3 Section Control Head and 8 Push-Buttons, 4-Position Slide Switch with a 7-Position Rotary Knob. Manual, Airhorn, plus 3 Traffic Advisor™ Switches and Microphone with Extension Cable, No Charge When Purchased with Amplifier Control Module |
|
CANCTL7 |
|
Includes 3 Section Control Head and 21 Push-Buttons, 4-Position Slide Switch, Microphone with Extension Cable, No Charge When Purchased with Amplifier Control Module |
|
16 Output Expansion Module |
|
CANLITEB |
|
Optional Light Sensor, Black Housing |
CANLITEC |
|
Optional Light Sensor, Chrome Housing |
CANTEMPB |
|
Optional Temperature Sensor, Black Housing |
CANTEMPC |
|
Optional Temperature Sensor, Chrome Housing |
Click model number for picture.
Create dynamic unified warning by incorporating every light and siren on your cruiser into custom program configurations. Officers keep both hands on the wheel instead of trying to figure out which button to push!
• Full function amplifier/control module
• Program and control all the lighting, traffic arrows and siren functions in your vehicle
• All outputs have both short circuit/ .over-current protection
• WeCan® lightbar plugs directly into .the amplifier/control module and is programmed by the CanTrol software
• Inputs for three different style control heads (ordered separately)
• Three analog inputs for temperature .sensor, ambient lighting, etc.
• Integrated battery voltage monitor
• Supports one or two 100 watt speakers
• Programmable for Hands-Free operation
• 161 synchronizable, variable-phase, programmable flash patterns
• Two optional expansion modules allows for 16 additional 2-1/2 amp outputs per module, plugs directly into the WeCan port, for a total of 75 outputs
• Over 45 programmable siren tones
• Includes PA and radio repeat functions
• Built-in system shut-down allows system to operate for up to four hours after vehicle is turned off
• Redesigned housing with integrated diagnostic LEDs for quick troubleshooting
• Optimized software
• Easy to configure using Windows .application program
• Pre-configured programs may be modified and stored for ease of service. Easily extract your custom program and transfer to other vehicles
• USB port in the amplifier/control module allows easy access for programming
• Power and input/output cabling with connectors, standard
• Each output has diagnostic indicator
• Eight inputs for customer supplied.external switches; four for use on.positive or ground switching, and four.for use on positive switching only
• Thirty-two 2-1/2 amp outputs
• Three low current 1/4 amp outputs
• Eight programmable 10 amp outputs
• Three Diagnostix™ system indicators
• Traffic Advisor™ module for traffic arrows that utilize a 9C cable eliminating the use of a traffic arrow controller
• WeCan lightbar Traffic Advisor can be synchronized with remote Traffic Advisors that utilize a 9C cable
• Meets or exceeds all applicable SAE, California Title XIII and NFPA requirements with various Whelen speakers, control heads and lightheads
• Five-year warranty
Contact your Authorized CanTrol® Distributor.
| Literature |
|---|
| Catalogs |
| Literature Order Forms |
| Price Lists |
| Product Sheets |
| Warranties & Trademarks |
| Installation Guides |
| Vehicle Packaging |
All products proudly designed, manufactured and assembled in the U.S.A.
Copyright Whelen Engineering Co., Inc.